Assurance and Auditing-Under the former system of controls, the

Essays on Assurance and Auditing-Under the former system of controls, the following misstatements were noted. Identify each of the following for EACH scenario Assignment Running Header: ASSURANCE AND AUDITING Assurance and auditing Introduction IT based program is better in accounting than manual one. However, it may lead to massive errors if necessary control application programs are not integrated. Scenario a A. The assertion that most relates to this scenario is the occurrence of purchase and cutoff assertions (Puncel, 2008). This is because a purchase that was done was recorded twice which means that a transaction that did not happen was recorded. The file was also recorded in a different week from which the transaction happened. B. The misstatement would lead to overstatement of expenses and accounts payable. Goods that have already been paid for will be charged again. C. To correct and avoid such this misstatement, an automated control program that will match the data file number and those saved in the master file, should be adopted. This program will prevent repeating file number that has been recorded earlier thus preventing the existence of such an error. A program that prompts the user for the date of the transaction should be integrated to make it more efficient. This will allow the person entering the data determine whether the documentation is outdated or up to date. Scenario b A. The relevant assertion that most relates to this situation is completeness of revenues (Puncel, 2008) because the product delivered is undercharged by quoting a lower price. The revenues earned from the transaction are thereby low than they should be. B. This will lead to understatement of sales and accounts receivable since a transaction was charged a small fee in the invoice than its true one on the catalogue. C. An automated application program that links the prices of products sold to the marked price should be implemented. It should match the product number in the invoice, and that found on the inventory. This application will inform the person preparing the account if he under of over quotes a product and provide a provision for discount allowed. It will only take a different figure from that on the inventory if the there is a cut which adds up to the marked price if added to the selling price. Scenario c A. This case fits well in the completeness of billing assertion since transactions were billed, but the billing was not recorded. B. The result of this is understatement of sales and accounts receivable since the billing of some goods delivered is not be recorded. It will also lead to overstatement of cash account since payment of the goods whose invoices were lost will not be accounted for. C. A possible remedy to this is to have a software program that will automatically match the shipping documents and the invoice documents. In case of omissions, the program will display a warning massage indicating the difference between the delivered products and the remunerations received. This will allow the accounting clerk to know which deliveries have not been billed and which have been billed. Scenario d A. This situation pertains to the completeness of expenditure assertion (Puncel, 2008). A fee that was supposed to be paid for inform of the commission was not recorded making the expenditures incomplete. B. The effect of this will be understatement of accounts payable and expenditure, due to failure to charge all costs of transacting. C. A possible solution to this will be the installation of an automated application that will link a transaction to all concerned departments. The application will display all the departments that are affected by a transaction automatically. It should also prohibit the closing of such a transaction before all the details of all the affected departments are entered. Where an error of omission is committed, a dialog box will pop up with an error massage which will prevent the occurrence of such an error. References Puncel, L. (2008). Audit Procedures. Chicago: CCH, 2007.

Computer-Controlled Systems Theory and Design

Question: Discuss about the Computer-controlled systems for theory and design? Answer: Introduction The most important equipment of a computer system are input and output devices. Input devices are used to insert some data into the system for the required calculation work. Output devices are used to obtain calculated data from the computer system in a desired format. Basic examples of input devices are keyboard, mouse, etc., and some basic output devices are monitor, printer and others (Baecker, 2014). All regular computer-human interactions require both input and output devices. In other words, input and output devices form a bridge between the real world and the computers system world comprising of collection of bits (Levy Eckhouse, 2014). The fundamental objective of input-output devices is the transfer of information between physical brain of human and the silicon brain of the computer. This research paper is based on the analysis of the working procedures of input and output devices and the methods to be followed to increase the speed and efficiency of human-computer interact ion (Gordon et al., 2012). Some recommendations are also provided to develop new devices to increase capabilities to perform more operations and applications as per requirements in a fast and efficient manner. Problem Statement There are two kinds of input-output devices local and remote. Local devices are directly connected to the main system and remote devices connect to the main system through some other devices like routers or through the wireless networks (Nanayakkara et al., 2013). Problems arise when a large number of input-output devices are connected to the system at once, especially in remote connections (Kim, 2012). When several inputs are inserted together through the input devices, the operations in the process may get slowed down or even cause errors. In addition, if there is a transmission failure, the remote input-output system may get closed down completely. Thus, the remote devices depend solely on the transmission medium for successful operation. Moreover, if there are no restrictions imposed, remote devices may be used for unauthorized activities (Helander, 2014). Problems also arise when a huge number of remote and local devices are connected to the system, which mainly due to the bulk amount of data transmission into the system. Research Goals The main goal of this research is to analyze the input and output devices and their operations. In addition, this research is connected to the efficiency and significances of the devices in the human-computer interaction process (Stair Reynolds, 2013). The main objectives are: Analysis of the benefits of input-output devices in computer system Analysis of internal characteristics of input-output devices Analysis of future usages of input and output devices and ways to increase their speed and efficiency Relevance of Research With the innovation of new hardware and software and evolution of the general computer system, the overall system configurations and the programming operations are getting more and more complex (Jain et al., 2012). Hence, a situation have arisen such that innovations must be made regarding the input and output devices in order to perform the changing requirements of operations. With the evolution of the software system and applications, there is need to upgrade the input and output devices to perform the required operations (Levy Eckhouse, 2014). This is why, there is a huge opportunity to conduct a research on input output devices to find ways to improve their operation speed and efficiency. In addition, research works can be conducted on the remote devices to innovate ways for their safe and fast operations (Helander, 2014). Literature Review Along with the storage device, the input and output devices are collectively termed as peripherals. After an input data is given to the system via an input device, the central processor makes calculations using data (Stair Reynolds, 2013). After that, the output data can be obtained via an output device. Thus, input and output devices are essential for the successful transmission and operation of the data. Some key input and output devices are discussed as follows. Input devices Keyboard This device is used to type a particular data in the computer screen needed for required calculation process. However, physical keyboards are becoming obsolete with the increasing popularity of hand-held and compact computer systems (Jain et al., 2012). Most of these systems have a touch screen feature in which, virtual keyboards are used for the input of text or numerical data. Mouse This particular device is used for selection operations in the system. The operation methods are selected using the input from the mouse. Use of mouse is getting more and more reduced nowadays since these operations can easily be done with the touch of a finger directly on the screen or a touchpad in some systems (Levy Eckhouse, 2014). Scanner This device is used to extract data from a printed source. The system automatically obtains data from the source and hence, no additional inputs are necessary (Isermann, 2013). Barcode and Card Reader These devices obtain encrypted data from a source and decrypt it within its system for conducting required operation (Kim, 2012). Many other input devices are used apart from these, which have their own functions. With the evolution of hardware and software of computer systems, the input methods have also undergone significant changes and many of conventional input devices are becoming more and more obsolete (Helander, 2014). New input methods are being introduced which are more compatible with modern day systems. Output devices Output devices is mainly a computer peripheral. Generally, there are two kinds of output devices, the softcopy device and the hardcopy device. The softcopy devices provide output in a sense receptive way, for example, audio (speakers) and visual (monitors) (Stair Reynolds, 2013). The hardcopy devices are those that provide output in a physical form like printout. The most significant output device is the printer. Nowadays, the softcopy devices are most useful since data exchange is mostly done in the wireless media. During conduction of this research, the researcher has analyzed the strength and weaknesses of each of the input and output devices (Levy Eckhouse, 2014). Input devices like keyboard and mouse are more useful in computer education level, although the proper use of keyboard requires typing proficiency (Jain et al., 2012). Sometimes, the mouse can also be tricky to use for the beginners. Other input devices like barcode reader, joystick, etc. require special software or interface. Some non-physical input devices like speech reader are also used but they have very limited database and vocabulary. Output devices are vital to obtain the calculated data needed for a particular requirement (Astrom Wittenmark, 2013). Physical device like printer is very important to obtain a hard copy of the obtained data. With the evolution of the computing system, lesser hard copies are used and calculated data are directly transmitted via wireless networks to save time and avoid casual errors (Jain et a l., 2012). This is why, physical output devices are finding lesser usage in the modern computing system. Since most of the conventional input and output devices are becoming obsolete, the more feasible and modern input and output techniques are to be developed and further upgraded to make them more compatible with modern computer systems (Stair Reynolds, 2013). The modern input and output devices, which involve transmission of data via public networks, are to be designed in such a way that they transmit data in a secure way (Isermann, 2013). In primitive computer systems, only physical input and output devices like a monitor, keyboard, mouse and CPU. In the prototype and the initial models, these devices consumed a large amount of space (Kim, 2012). In addition, data calculations were extremely slow and inaccurate (Helander, 2014). Thus, those primitive systems were very unreliable and hard to use. In modern computer system, devices are designed in such a way that they consume least amount of space and calculate data very accurately within the fraction of a second. What huge block of systems could not do, small microchips can perform it quickly and accurately (Levy Eckhouse, 2014). For further reduction of space and size of device, physical input and output devices are excluded from modern systems and virtual devices are introduced in which, input can be given and output can be obtained with the touch of a finger. Further research works are necessary to redesign and evolve the virtual devices in an even broader sense to increase their applications and feasibility in future computer systems (Kim, 2012). Synchronous and Asynchronous Operations of Input-Output System Synchronous and asynchronous input/output procedures are the two essential working modes for a specific input-output device system (Hinckley et al., 2014). During synchronous operation, the physical data exchanges are not synchronized or interlocked with the execution of a project's data operations. For instance, as cited by Boell Cecez-Kecmanovic (2012), a client using a typewriter will be permitted to sort messages into a definite framework before the execution of the read articulations, which will be utilized by them; and according to Patterson Hennessey (2013), each and every execution of a read proclamation just culls the next enduring message of a data buffer. This illustration of asynchronous information is similar to buffered read-ahead plans, which have been utilized with tapes, discs and so forth (Astrom Wittenmark, 2013). A sample of asynchronous yield is the gathering of yield in a central buffer until some physical record size is found (Helander, 2014). In the synchro nous mode, the physical exchange is connected with a project's input-output operation, and is done according to the given statement (Stair Reynolds, 2013), i.e., control does not come back to the system until the actual exchange is finished (Levy, 2014). For instance, according to Isermann (2013), a user, using a typewriter, would not be permitted to sort data (in case of locked keyboard) until the read explanation is found. As opined by Siewiorek Swarz (2014), for a specific stream, the input and output modes are autonomous; for instance, the input data may be interlocked but not the output. The modes are declarable both before and amid execution by calls to the UIM (Jain et al., 2012). Suitable translation of these modes seems feasible for numerous associated streams and gadgets. Foundation of a mode adds up to figuring out which framework module in the chain starts the return to the client program. Under most circumstances, asynchronous input-output procedure is the most profic ient (Vazirani Vidick, 2014). The synchronous or interlocked input-output data is valuable when an administrator or client attention is required, and most imperative when a client is communicating with an un-debugged, weird, or numerous expanded system (Isermann, 2013). The synchronous mode ought to be forced on a remote terminal at whatever point a stream is not connected with the terminal, i.e., when there is no system to receive transmitted messages. Research Methodology A most important part of any research work is the research methodology. A particular research strategy is important to determine the path in which the research will be conducted. In addition, following a definite research methodology helps in obtaining useful data without much effort (Booth, 2014). In this particular research, data has been obtained from reliable sources like journals and works of reputed researchers in this field. Related works of reputed researchers have been explored to analyze the subject to obtain the most useful data. Suitable acknowledgements have also been provided (Stair Reynolds, 2013). Many reputed scholars and researchers have explored the subject of input and output devices and provided possible solutions for the problems and improvements. These evaluations and analyses have been taken into account while conducting this research and further issues have been addressed (Aviram et al., 2012). For the main examination procedure of this research, online survey has been the main source for data gathering. Besides, the written work review is considered as the discretionary data for the examination. The researcher quantitative data collection technique for this research study. The subjective data assembled gives theoretical idea of examination technique while the quantitative data accumulated presents the accurate consequence of the examination (Venables Ripley, 2013). In this research, the essential information gathered from numerous sources can be considered for the further research on the same subject. Research Summary Input and output device is the computer peripheral which is used to input the data in a system and gating output from this system. All regular computer-human interactions require both input and output devices. This research work mainly focuses on the evolution and significance of input and output devices in modern computer systems. The original input and output devices are discussed in this research work as well as the modern day systems. Moreover, the significances and compatibilities of existing physical devices in current computing system are examined. The researcher present some previous research article to support this research study in the literature review section and clearly discussed the research process or methodology in the research methodology section. A close analysis has been done on the existing works on input and output devices and results of further studies are discussed as well as scope for even further studies are mentioned. Future Research This research paper can be further explored in future to develop better input and output devices, which will be more efficient in handling bulk data and help secure transmission of input and output data. Alternative input and output devices can be designed to meet requirements of changing software operations. This research paper may also act as a guide for the future researchers to understand the operations and significance of the working input and output devices and how they can be modified further. Modern day computers are evolving; more and more compact computer devices like laptops, palmtops and smartphones are being invented. These systems are easier to carry and use. These small devices are limiting the uses of conventional input devices like keyboard, mouse, etc. Hence, new compact input devices are to be invented to fit into these compact systems. Direct input methods like touch screen, and speech to text are becoming very popular lately, and hence, more research works can be conducted to increase the usability of touch screens and other direct input processes. Furthermore, researches can be conducted to replace physical connection between system and the devices with wireless connections. This research paper can be used as a basis for all the suggested future research works. Conclusion From this research, it can be concluded that the most important equipment of a computer system are the input and output devices without which, no data transmission can be conducted between the computer system and the physical world. Input and output devices can be connected to the main system via physical connection or wireless networks. Wireless connections are generally needed to establish remote connections. With the evolution of the basic programming and applications in the computer system, more advanced input and output devices are needed to perform required operations efficiently. With the growing popularity of compact computer systems, new input and output methods like touch screen are to be explored more to increase their usage and efficiency in daily operations. References Astrom, K. J., Wittenmark, B. (2013).Computer-controlled systems: theory and design. Courier Corporation. Aviram, A., Weng, S. C., Hu, S., Ford, B. (2012). Efficient system-enforced deterministic parallelism.Communications of the ACM,55(5), 111-119. Baecker, R. M. (Ed.). (2014).Readings in Human-Computer Interaction: toward the year 2000. Morgan Kaufmann. Boell, S. K., Cecez-Kecmanovic, D. (2012). Conceptualizing Information Systems: from'Input-Processing-output'Devices to Sociomaterial Apparatuses. InECIS(p. 20). Booth, P. (2014).An Introduction to Human-Computer Interaction (Psychology Revivals). Psychology Press. Chu, Y. (Ed.). (2014).High-level language computer architecture. Academic Press. Gordon, A., Amit, N., Har'El, N., Ben-Yehuda, M., Landau, A., Schuster, A., Tsafrir, D. (2012). ELI: bare-metal performance for I/O virtualization.ACM SIGPLAN Notices,47(4), 411-422. Helander, M. G. (Ed.). (2014).Handbook of human-computer interaction. Elsevier. Hinckley, K., Jacob, R. J., Ware, C., Wobbrock, J. O., Wigdor, D. (2014). Input/Output Devices and Interaction Techniques. Isermann, R. (2013).Digital control systems. Springer Science Business Media. Jain, R., Werth, J., Browne, J. C. (Eds.). (2012).Input/output in parallel and distributed computer systems(Vol. 362). Springer Science Business Media. Kim, J. W. (2012). Human Computer Interaction.Ahn graphics, Beaumont. Levy, H. M. (2014).Capability-based computer systems. Digital Press. Levy, H., Eckhouse, R. (2014).Computer programming and architecture: The VAX. Digital Press. Nanayakkara, S., Shilkrot, R., Yeo, K. P., Maes, P. (2013, March). EyeRing: a finger-worn input device for seamless interactions with our surroundings. InProceedings of the 4th Augmented Human International Conference(pp. 13-20). ACM. Patterson, D. A., Hennessy, J. L. (2013).Computer organization and design: the hardware/software interface. Newnes. Siewiorek, D., Swarz, R. (2014).Reliable Computer Systems: Design and Evaluatuion. Digital Press. Stair, R., Reynolds, G. (2013).Principles of information systems. Cengage Learning. Vazirani, U., Vidick, T. (2014). Fully device-independent quantum key distribution.Physical review letters,113(14), 140501. Venables, W. N., Ripley, B. D. (2013).Modern applied statistics with S-PLUS. Springer Science Business Media.

Location factors for business Essay Example Essay Example

Location factors for business Essay Example Paper Location factors for business Essay Introduction All businesses, whether they produce goods or service, have to decide where to locate. This can depend on the fact that the firm wants to be closer to its target audience or produce the goods at a location where it is cheapest, it can be also linked to the business environment and other reasons aspects of the business which would affect the location of the firm.Demography:This is were the size of the population and the changes in the population are taken into consideration and studied in depth. Many businesses, mainly businesses which are included in the service sector are influenced by the demographic factor. For example on the south coast of England, Bournemouth has the highest percentage of elderly people living there, and that is the highest population in UK of the elderly situated in one area. Si this attracts people to Bournemouth to retire for to main reasons which are its climate, and the services businesses have in offer therefore there are many businesses which specialise i n providing the elderly community with goods and services best suited for that target audience.Seen as compulearn is also partly linked to the service sector it will be looking into demography because Compulearn also does services and thereby will need to look into the number of the population which in this case will be the population of Hounslow which is 212341, and it will need to look I will look into the changes within the school.Infrastructure:The infrastructure is the built environment such as the roads, factories, schools, railways, airports, houses and hospitals. The infrastructures of an area will affect the location of businesses. Most businesses tend to buy or rent premises which already exist; this is because it is cheaper than building a whole new factory for business. For example, a business thinking of setting up a shop may want to set up in an area were many other stores would exist and many customers. A larger business however may look for a location with good housi ng, school and leisure facilities for employees.There are also a few businesses which would prefer to build on Brownfield or Greenfield sites. Brownfield sites are sites which locate availability for industrial buildings or house. Greenfield sites are locations available for industrial or residential buildings, however the Greenfield site will agriculture or on developed piece of land which has never been built on before. These businesses may lose out when locating in Greenfield or Brownfield site. This is because Greenfield and Brownfield sites because it will have to pay more due to water and gas pipe fixing and electricity and phone connections and so on. However there are some advantages to having Brownfield and Greenfield sites because businesses are abler to build the infrastructure for the business and so the infrastructure will suit the businesses every requirement. None of this will be required of compulearn will be locating at Bell Road, Hounslow, Middlesex electricity and telephone will have to be paid for.Labour:Availability of employees in the area is vital. Businesses need to research on the availability of suitable employees in that area for the business; this involves employees having the right set of skills for the for example knowing how to program in c++(Computer language) or HTML (Website Language Short for Hyper text mark up language) this would save the business money because the business would not have to send the employee on a course which would cost a substantial amount of money. To do this I must.1. Consider the population statistics in the area2. The number of people who are looking for jobs3. The skill that workers will need to have4. The wage or salary that people in that area will expect.Many businesses locate their business in that area’s which would benefit them the economy. For example businesses may situate in places such as UK because the total cost of hiring employees will be lower and UK labourers is well educated an d trained for jobs. Compulearn will have employees because it will need more than on teacher to help classes also we will need teachers with different skills so that every course has a teacher that is specialised in the field.The cost of premisesIts important that businesses have premises, this for businesses can be quite cheap or very expensive, the cost of the premises can vary enormously depending upon their availability, and this is all to do with land. Businesses wanting to be closer to customers would therefore would be extremely expensive and could have down fall in production , land is cheaper further out of the capital city because there is more land available, however this means that there isn’t a thrive in mass production and consumers are more likely to be in the cities where all businesses prosper. Compulearn will have to pay mortgage to the bank.The availability of premisesThere isn’t much availability of premises and the ones that maybe very expensive su ch as city centre sites will be quite expensive for businesses and only those who can really afford to splash out will be able to afford these sites. The sites will also need to be the right size for the firm, for example a small local convenient store wouldn’t need premises as big as Tesco’s or Asda to locate. Also out of town developments are more popular now then ever before. Compulearn will need to have a decent size premises, a decent size premises is 15m x 15m.Where the suppliers areFor some businesses locating near the suppliers is necessary because the products needed to be produced maybe large and transportation will be expensive. For the businesses and thereby, locating the business near the suppliers is cheaper, or in other cases the firms need to be closer to the natural resources and will have to locate somewhere suitable for the business to be close to the natural resources. Compulearn suppliers will be on the internet this known as E-commerce. Compulearn will not need to be closes to the suppliers because all the products will be delivered to the location of the business Bell Road, Hounslow, Middlesex.Where the customers areCompulearn will need to locate near the customers; because this is the best way for Compulearn to be known and attract more customers this will boost our profits. Seeing as Compulearn will be locating in an area of London with a unemployment rate of 2.6% of the population being unemployed and 5% being unemployed for 2 years or more. This would be good for my business because they could start my course and get themselves a high paying job.Where the competitors areOften businesses will locate near their competitors. This is because they can compete in the market; however some business may stay away from competitors so customers have less choice and will have few options. For example compulearn will be locating further enough so that we are able to be the only one in that area with a computer teaching business but close enough to provide competitive prices to compete with other businesses in Hounslow, all businesses need a USP. This means a unique selling point where no other business can take over, this unique selling point will help the business attract the customers needed for making a profit.To do this businesses need to attract the customers needed for making a profit, to do this businesses need to identify competitors, and identify their own unique business and what makes their business special from the competitors. Compulearn has identified potential competitors which are other businesses running in Hounslow. We will be offering services to consumers. Compulearn sells services that will teach the consumer how to use a computer or how to code in c++ which Learn direct do not teach. We will be able to get you a degree in the language so that you can get a job. This is one of our unique selling points which we will use to our advantage.Some businesses my need to locate near roads, railway s and ports; this links to infrastructure because the roads and rail ways and ports are the built environment of the firm. A business needs to have good transport links for the products to be consumed by customers; the customers need to get the products quickly so the company bring more products in. This way more products will be sold and the money can be reinvested back into the business.They also need good transport links so the customers can easily get to the location of the business and buy the products and because Compulearn is near two major tube stations then we would obviously sell more of our learning packages to the people that need it, this will increase our profit which we could then use to help forward the business, like buy another store in another prime location so that we would be able to make more of profit and also a bigger share in the market. The good transport links makes it easier for our customers to get to us and also easy to find us.ConclusionLocation to com pulearn is important because even though the business may have the perfect service which will fill the demands of customers, if the location is not right, the business will loose out and if we loose out on customers then we will not be able to keep up with the rent of the property and would mean that we would need to cut back on costs which would lead to less courses being taught and less customers coming and a lower customer satisfaction. A business such as compulearn who is a small partnership needs the right location for the business because without the right location the business will not survive.The right location for the business will be in a area that has a low employment and is need for education. Our business will be the best way for the area to regenerate itself. If the business does not get potential customers the business will again loose out and will not make enough profit for the business to on and wil have to close down, because there is not enough consumers available because of the location. For compulearn being a vibrant area will help the business substantially also the business will be able to advertise by using word of mouth advertising and by this the profits of compulearn will increase. Location factors for business Essay Thank you for reading this Sample!

viral infections essays

viral infections essays VIRAL INFECTIONS: THE TRUE WHYS AND WHAT NOWS It all started with a little tickling in my throat. I forged ahead, knowing all too well what that feeling meant, I was getting sick. I convinced myself to just not think about it and it would just go away. This whole time there was an army of alien species amassing in my bloodstream and older cells. They are horrifyingly ugly, like something straight out of H. R. Geigers imagination. They writhe and twitch while they are on the hunt for one of your precious body cells. One can almost imagine them squealing to one another "Thats the one fellas, that is the cell we turn into Fort Viri!!". Then they attack, attaching their bodies to the cells only defense, its outer wall. The cunning viri know this dance all too well, the cell has no chance. All too quickly the viri convince the cell, via complex chemical codes to admit the viri into its life blood, the cytoplasm. Soon they would turn this doomed cell into a virus nursery, churning out countless clones of the virus that converted the original cell. I now must resign myself to the fact that I have somehow come into contact with a virus and it has started to multiply in my body. By now the symptoms are undeniable and all encompassing. I have the flu. Viral infections are caused by a host organism taking in and precipitating the reproduction of viruses. These infections bring with them a miriad of symtoms including, but not restricted to fever, general achiness, increased mucous production, and general sluggishness. This entire chain of events starts when a person comes into contact with a virus. This can happen a number of ways: contact with infected body fluids, contact with the mucous membranes of an infected person, and even inhalation of airborne viri. When one comes into contact with a virus, it wastes no time in making your body its new home. It quickly finds a bo ...

What makes bad logo Essay Example | Topics and Well Written Essays - 250 words - 1

What makes bad logo - Essay Example 2008). The use of computer tricks in designing a logo could also make it a bad logo. Thus, if the logo that is meant to be created by hand is created with the use of a computer, it makes it a bad logo. An example of a bad logo is the logo of the London Olympic Games. Many people actually find this logo bad and it is good to look at the reasons that, this logo has been adjudged bad. Personally, the logo looks too childish in nature, as the designers did not take the age of the adult followers into consideration. A good logo should cut across the age of its audiences and anything short of this makes the logo a bad one. Thus, the logo of the London 2012 Olympic Games is bad due to its childish nature. It makes one think that the Olympic is meant only for kids. Another thing that makes the logo for the London Olympic Games bad is the fact that, the colour scheme does not look original. One would have the feeling that, it is an imitation of the works of Nike and this should not be so. The fact that, the logo does not look original puts the credibility of the designers to

Ragamuffin War Essay Example | Topics and Well Written Essays - 1250 words

Ragamuffin War - Essay Example These two army generals succeeded in making the war big because of the support they got from Giuseppe Garibaldi who was an Italian fighter. The war ended came to ending on March 1, 1845 after there were negotiations that led to the signing of the Ponche Verde Treaty. The Ragamuffin War was a big war that took place in the Brazilian Empire. The cause of the war was that there had risen a difference between the status of the economy in Rio Grande do Sul as opposed to the other states within the Brazilian Empire. The main issue with the economy was that there was an over focus on the internal market as opposed to the external market; this means that the income that came from the exports was relatively low. The internal market was going through hard times after the products that came from region faced much competition from commodities from outside the state, especially from Uruguay and Argentina, where dried and salted beef came from. The taxes imposed to the gauchos (the residents of Rio Grande do Sul) were relatively higher than that which was imposed in other states. The goods from the two highly competitive countries were tax free, an aspect that forced the local goods to suffer a big blow. The outburst of the war came immediately after a presidential election. In the elections held the same year the war began, Antonio Rodrigues Braga was elected the president of the Rio Grande do Sul. As expected by many, the president would make changes that would see that the state benefit more from its production after the heightened competition from products outside the state. Despite being impressive in the first days of his appointment, he began having resistance from the farming community. The perceived unfairness in trade caused general Bento Goncalves to initiate a revolution that would see the overturning of the government. This took place in September of 1935, where the General took captive of Porto Alegre and

Animals Should Not Be Used for Medical Testing Essay Example for Free

Animals Should Not Be Used for Medical Testing Essay Tina Date: 11/29/2011 Animals should not Be Used for Medical Testing Nowadays, animals are used for medical testing which is hurtful and not necessary. Tens of millions of animals are used each year in federally and privately funded experiments. Do animals feel the same pain that human feel? How do we know that other humans feel pain? We all know that we ourselves can feel pain. We know this from the direct experience of stubbing toe on a chair, or having finger slammed in a drawer. So animals are as same as human. They have feelings about hurt, happiness, and pain either. Therefore, animals should not be used for medical testing because animals have the rights to survive, not a prey for vivisection in laboratories, and there are still having so many ineffective of drugs in the world. Pain is a physical event; something that cannot be observed. Pain is something that is felt, and we can only assume that other humans can feel pain from external indications such crying, screaming, or jerking away from something. If we can justify that other humans feel pain, why do human think that animals do not feel pain by continue using animals for testing? Considering that all living beings possess natural rights that any animals with a nervous system have specific rights to survive in the world. All animals are born equal and they have the same rights as human to existence in this planet. Why do not human save animals instead of killing them by many unnecessary testing? When an animal is poked, burned, or stepped on, they will cry, yelp, or jerk away. Since the external indicators are the same, we can assume that animals feel the same pain that we as humans feel. Today the medical term â€Å"vivisection† is used. Vivisection is defined as â€Å"cutting while still alive†; it is more commonly used today that is performed on animals especially. Charles River Breeding Laboratories, a company owned by Bausch and Lomb, provides 40-50% of the animals used in experiments of laboratories (Mercy For Animals). Medicine testing on animals is inaccurate and does not benefit humans at all. Every single day in a year, animals including, but not limited to, dogs, cats, rabbits, mice, rats, hamsters, rhesus monkeys, and cattle are commonly used for vivisection. Animals are innocent! They are organisms that have the rights to existence and to be respected by humans. They are not prey for vivisection in the laboratories. Vivisection is unethical. Furthermore, testing on animals is unreliable. Human rarely think about the opposite side of their experiments. New drugs can pass safety on animals but this does not mean that human can use these drugs safely because animals and humans do not get the same diseases. Animals’ cells are so different from humans’ cells. For example, Opren drug caused 3500 people to suffer serious side effects including damage to skin, eyes, liver, and kidneys (Tachell). Thalidomide caused about 10,000 birth defects worldwide (CAAT), and Clioquinol caused 30,000 cases of blindness and paralysis and thousands of death (CAAT). Conversely, many drugs that are beneficial to humans are dangerous to animals. Penicillin, which is an antibiotic to humans, kills guinea pigs. Aspirin causes birth defects in rats, mice, monkeys, but it does not harm in humans any way. In the last 15-20 years, it has been estimated that animal testing has decreased 30-50% due to the reduction and replacement techniques (Tachell). The most common alternatives that are used today are: in-vitro tests, computer software, and even human â€Å"clinical tests. † Human have to understand that this planet is not only ours, but the animals as well. Albert Einstein once said, â€Å"Our task must be free ourselves†¦By widening our circle of comparison to embrace all living creatures and the whole of nature in its beauty. † (CAAT) The means of living a healthy and fulfilled life is to embrace and respect all life on this planet. The animals cannot tell the scientist that they do not want to be tested on, but we can. http://www.un.org/en/ http://www.mercyforanimals.org/ http://www. animalliberationfront. com/Philosophy/Animal%20Testing/whyanimaltestingisbad. htm.